We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
100 W AC/DC DIN Rail mountable charger for lead acid batteries; 12V/6A or 24V/5A CB12245A
SKU
CB12245A
• Universal Input Range: 90…305 VAC
• Package: Can be installed on DIN rail TS-35
• Single regulated adjustable output to 100 W
• Suited for the following battery types: Open Lead Acid, Sealed Lead Acid, lead Gel
• Battery Care for, automatic diagnostic of battery status, short circuit element
• Charging curve IUoUo, constant voltage and current
• Battery Life Test function
• Four charging levels: Boost, Absorption, Trickle and Recovery
• High Efficiency up to 90%
• Operating Temperature: -25…+70 °C (with derating)
• Isolation class I
• Isolation output-input: 3000 VAC
• Protected against short circuit, over load and inverted polarity
• Contact free signal output for fault battery state
• MTBF: >300 000 h (IEC 61709)
• Standards: IEC/EN 60335-2-29, EN60950/UL1950, 89/336/EEC, CE
• EMC: 2006/95/EC, DIN41773, IEC 61000-6-4, IEC 61000-6-2
• Dimensions: 45x105x100 mm
• Weight: 300 g
The CB series is a “Switching technology” and “Battery Care philosophy”, since years parts of the core know-how at ADEL system, led to the development of this advanced multi-stage battery charging method, completely automatic and suited to meet the most advanced requirements of battery manufacturers.
The Battery Care concept is base on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. The Real Time Autodiagnostic system, monitoring battery faults such as, elements in short circuit, accidental reverse polarity connection, disconnection of the battery, they can easily be detected and removed by help of Blink Code of Diagnosis Led; during the installation and after sell.
Each device is suited for all battery types, by means of jumpers it is possible setting predefined curves for Open Lead Acid, Sealed Lead Acid, Gel, Ni-Cd and Li-Ion (optional) batteries. A rugged casing with bracket for DIN rail mounting provide IP20 protection degree.
Available options:
CBI-Holders Battery modules for sealed lead acid batteries
The Battery Care concept is base on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. The Real Time Autodiagnostic system, monitoring battery faults such as, elements in short circuit, accidental reverse polarity connection, disconnection of the battery, they can easily be detected and removed by help of Blink Code of Diagnosis Led; during the installation and after sell.
Each device is suited for all battery types, by means of jumpers it is possible setting predefined curves for Open Lead Acid, Sealed Lead Acid, Gel, Ni-Cd and Li-Ion (optional) batteries. A rugged casing with bracket for DIN rail mounting provide IP20 protection degree.
Available options:
CBI-Holders Battery modules for sealed lead acid batteries
| SKU | CB12245A |
|---|---|
| Output Power | 100 W |
| Output voltage | 12 / 24 VDC |
| Output Current | 6,0 A / 5,0 A |
| Input Voltage | 90 - 305 VAC |
| Efficiency | 90 % |
| Technology | 3 step charge |
| Battery capacity | 30 - 150 Ah (12V) 20 - 200 Ah (24V) |
| Operating Temperature | -25…+70 °C |
| Construction | DIN rail |
| IP Grade | IP20 |
| Input Connections | Screw terminal |
| Output Connections | Screw terminal |
| Color | Grey |
| Dimensions | 45 x 105 x 100 mm |
| Weight | 300 g |
| Brand | Adel |
| Package | 1 |
| Availability | 4 - 6 weeks |
Write Your Own Review
Related Products
