We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
10 W USB car charger for concealed installation, 9-32/5 VDC 2,1 A PV65R-S
SKU
PV65R-S
• Input voltage range: 9 - 32 VDC
• Single 5V USB output 2,1 A
• Detect the type of product attached
• LED output indication
• Input connectors: 6.3mm push-in flat blade
• Output connector: USB type A single socket
• Dashboard or seat back installations
• Ingress protection: IP65 (electronic parts)
• Operating temperature: -25…+55 °C
• Weight: 36 g
PV65R-S is a rugged single output 10 W USB car charger for concealed installation, 9-32/5 VDC 2,1 A.
FOR MOBILES AND TABLETS – THE SAFE ALTERNATIVE FOR ON BOARD POWER
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vehicle and allow both drivers and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity on vehicles. The 5Volt DC power is much safer than mains, so installation is quick and simple. Passengers can access the charging facility directly and power their equipment simply through the USB charging lead which is supplied with all such products. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.
Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. Part number is: PV-USB2. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable. Please order part numbers; PVPro-S-Assy (single) and PVPro-D-Assy (double).
The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vehicle.
For Rail installations, the PV65R-S can be connected directly to the electrical system (either 12V or 24V). These units have been approved to EN 50155.
However, if the system specification requires galvanic isolation, then the PVPro range units can be used in conjunction with the Alfatronix PV6i-R or PV12i-R isolated railway approved converters. These units have also been tested as a system to EN 50155.
Both systems have been approved for Rail Fire EN45545-2.
FOR MOBILES AND TABLETS – THE SAFE ALTERNATIVE FOR ON BOARD POWER
The widespread use of smartphones and computer tablets has created an increasing need for user accessible, on the move charging systems. The PowerVerter USB Chargers can be easily installed onto any vehicle and allow both drivers and passengers to readily access power to charge any device connected via a USB lead. This type of system has the distinct advantage of largely negating the need for mains electricity on vehicles. The 5Volt DC power is much safer than mains, so installation is quick and simple. Passengers can access the charging facility directly and power their equipment simply through the USB charging lead which is supplied with all such products. All versions in the range can be connected directly to both 12Vdc and 24Vdc systems without adjustment. The advanced electronic design will also automatically detect if the device is an Apple or Android configuration and alter the charging process accordingly. This ensures that whatever device is connected, be it Apple, Android, iPad, phone or tablet, it will always be charged as fully as time and capacity allow.
Electronically, the design now includes automatic short circuit detection, so in the event of tampering or compromise, the unit will automatically shut down, then re-start again once the fault has been removed. A charger only version is also available for permanent, behind the scenes installations without customer interface. Part number is: PV-USB2. The range is completed with our ‘Pod’. This is ideal for retrofit installations and is designed to fit underneath the seat in front. This system can also be bought as a complete assembly including; PVPro USB charger, pod and 1.2m of fused cable. Please order part numbers; PVPro-S-Assy (single) and PVPro-D-Assy (double).
The PowerVerter USB chargers offer an advanced design that effectively counteracts the voltage drop common when output currents vary as different devices charge at different rates. This avoids the common problem of the phone or tablet indicating it is charging when in fact very little current is being supplied. They also have an exceptionally low quiescent current of less that 2mA meaning that multiple devices can safely be installed throughout buses and coaches without materially discharging the battery.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vehicle.
For Rail installations, the PV65R-S can be connected directly to the electrical system (either 12V or 24V). These units have been approved to EN 50155.
However, if the system specification requires galvanic isolation, then the PVPro range units can be used in conjunction with the Alfatronix PV6i-R or PV12i-R isolated railway approved converters. These units have also been tested as a system to EN 50155.
Both systems have been approved for Rail Fire EN45545-2.
| SKU | PV65R-S |
|---|---|
| Output Power | 10,5 W |
| Output voltage | 5,0 VDC |
| Output Current | 2,1 A |
| Input Voltage | 9 -32 VDC |
| Efficiency | 90% |
| Technology | Switcher, regulated |
| Operating Temperature | -25…+55 °C |
| Construction | Mounting tray |
| IP Grade | IP65 |
| Input Connections | Push-on terminals 6,3 mm |
| Output Connections | USB A |
| Color | Grey |
| Dimensions | Ø37 x 40 mm |
| Weight | 36 g |
| Brand | Alfatronix |
| Package | 1 |
| Availability | 2 - 3 weeks |
Write Your Own Review
Related Products
