We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
15 W USB-C car charger for concealed installation, 9-32/5 VDC 3,0 A PVPRO-C
SKU
PVPRO-C
• Input voltage range: 9 - 32 VDC
• Single 5V USB-C output 3,0 A
• Detect the type of product attached
• LED output indication
• Input connectors: 6.3mm push-in flat blade
• Output connector: USB type C single socket
• Dashboard or seat back installations
• Ingress protection: IP30
• Operating temperature: -25…+55 °C
PVPRO-C is a single output 15 W USB car charger for concealed installation, 9-32/5 VDC 3,0 A.
A & C PORT USB CHARGING FOR 12V AND 24VDC APPLICATIONS
The ever-popular PowerVerter PVPro Range of USB chargers has now been updated to include USB-C options, expanding on the great design concepts of USB charging on vehicles. Models are now available offering combined Dual USB-A & C and Single USB-C output versions.
As well as standard (rear fit), all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required.
Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments such as for installation into vehicle walls.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB-C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
THE RANGE
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
SAFETY
A requirement of the USB standard is that the metal cage around the USB plugs and sockets is connected to ground (zero volts). If a USB charger is to be used in an application with a positive ground, i.e. battery/supply positive terminal is connected to the vehicle chassis, then there is a risk that the exposed metal cage of any USB cable could come in contact with the positive connected chassis, causing uncontrolled heating of the USB cable and USB charger and potentially creating a hazard. In positive ground applications, we recommend installing an Alfatronix isolated converter between the positive ground supply and the input of the USB charger.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vehicle.
A & C PORT USB CHARGING FOR 12V AND 24VDC APPLICATIONS
The ever-popular PowerVerter PVPro Range of USB chargers has now been updated to include USB-C options, expanding on the great design concepts of USB charging on vehicles. Models are now available offering combined Dual USB-A & C and Single USB-C output versions.
As well as standard (rear fit), all models are also available in front fit versions. This is a popular option for when rear space access is limited, and also allows for quick removal and replacement if required.
Ingress protection is to IP30 as standard. However, the PVPWp versions retain the slimline design and offer enhanced protection to IP65 (not connectors). The ruggedised PV65R versions which are also IP65 (not connectors), offer additional transient protection and are particularly suitable in more demanding environments such as for installation into vehicle walls.
Output power performance has also been enhanced. As well as charging both Apple and Android mobile phones, the USB-C models offer higher current outputs for limited charge assistance on tablets and laptops.
Standard versions require only 20mm (typical) rear space and can easily be installed in bus and coach seat backs, walls and dashboards. A series of installation pod designs enable retrofit options for underseat, table and wall mounting.
THE RANGE
All units are installed through a 30mm hole. Standard format units are retained by a rear nut while the front fit versions include a bezel with tamperproof cover ring. Input power is by way of two 6.3mm push-in flat fit automotive terminals.
SAFETY
A requirement of the USB standard is that the metal cage around the USB plugs and sockets is connected to ground (zero volts). If a USB charger is to be used in an application with a positive ground, i.e. battery/supply positive terminal is connected to the vehicle chassis, then there is a risk that the exposed metal cage of any USB cable could come in contact with the positive connected chassis, causing uncontrolled heating of the USB cable and USB charger and potentially creating a hazard. In positive ground applications, we recommend installing an Alfatronix isolated converter between the positive ground supply and the input of the USB charger.
They have been designed to meet the rigorous standards required for on board commercial vehicle applications including BS EN50498 and ISO 7637-2 and are both CE and E marked. The casings are made from V0 rated (self-extinguishing) high impact polycarbonate and the electronic assembly is predominantly by computer controlled SMT for maximum reliability. All versions have a subtle blue LED light to highlight their location on the vehicle.
| SKU | PVPRO-C |
|---|---|
| Output Power | 15 W |
| Output voltage | 5,0 VDC |
| Output Current | 3,0 A |
| Input Voltage | 9 -32 VDC |
| Efficiency | 90% |
| Technology | Switcher, regulated |
| Operating Temperature | -25…+55 °C |
| Construction | Mounting tray |
| IP Grade | IP30 |
| Input Connections | Push-on terminals 6,3 mm |
| Output Connections | USB C |
| Color | Grey |
| Dimensions | Ø37 x 34 mm |
| Weight | 20 g |
| Brand | Alfatronix |
| Package | 1 |
| Availability | 2 - 3 weeks |
Write Your Own Review
Related Products
