We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
36 W DC/DC DIN Rail mountable charger for lead acid batteries; 12 VDC 3 A CB123A/48
SKU
CB123A/48
• DC Input 48 VDC
• Package: Can be installed on DIN rail TS-35
• Single regulated adjustable output to 36 W; 12 VDC
• Suited for the following battery types: Open Lead Acid, Sealed Lead Acid, lead Gel
• Automatic diagnostic of battery status. Charging curve IUoUO, constant voltage and constant current
• Battery Life Test function
• Three charging levels: Boost, Trickle and Recovery
• High Efficiency >81%
• Operating Temperature: -25…+70 °C (with derating)
• Isolation class I
• Isolation output-input: 3000 VAC
• Protected against short circuit, over load and inverted polarity
• Contact free signal outputs:
for low battery, fault battery and for mains or back-up
• MTBF: >300 000 h (IEC 61709)
• Standardit: IEC/EN 60335-2-29, EN60950/UL1950, EN54-4, 89/336/EEC, CE
• EMC: 2006/95/EC, DIN41773, IEC 61000-6-4, IEC 61000-6-2
• Dimensions: 45x100x100 mm
• Weight: 300 g
The CB series is a “Switching technology” and “Battery Care philosophy”, since years parts of the core know-how at ADEL system, led to the development of this advanced multi-stage battery charging method, completely automatic and suited to meet the most advanced requirements of battery manufacturers.
The Battery Care concept is based on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. The Real Time Autodiagnostic system, monitoring battery faults such as, elements in short circuit, accidental reverse polarity connection, disconnection of the battery, they can easily be detected and removed by help of Blink Code of Diagnosis Led; during the installation and after sell.
Each device is suited for all battery types, by means of jumpers it is possible setting predefined curves for Open Lead Acid, Sealed Lead Acid, Gel, Ni-Cd (option). They are programmed for two charging levels, boost and trickle.
A rugged casing with bracket for DIN rail mounting provide IP20 protection degree. They are extremely compact and cost-effective.
Available options:
CBI-Holders Battery modules for sealed lead acid batteries
The Battery Care concept is based on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. The Real Time Autodiagnostic system, monitoring battery faults such as, elements in short circuit, accidental reverse polarity connection, disconnection of the battery, they can easily be detected and removed by help of Blink Code of Diagnosis Led; during the installation and after sell.
Each device is suited for all battery types, by means of jumpers it is possible setting predefined curves for Open Lead Acid, Sealed Lead Acid, Gel, Ni-Cd (option). They are programmed for two charging levels, boost and trickle.
A rugged casing with bracket for DIN rail mounting provide IP20 protection degree. They are extremely compact and cost-effective.
Available options:
CBI-Holders Battery modules for sealed lead acid batteries
| SKU | CB123A/48 |
|---|---|
| Output Power | 36 W |
| Output voltage | 12 VDC |
| Output Current | 3,0 A |
| Input Voltage | 48 VDC |
| Efficiency | 81 % |
| Technology | 3 step charge |
| Battery capacity | 12 - 70 Ah |
| Operating Temperature | -25…+70 °C |
| Construction | DIN rail |
| IP Grade | IP20 |
| Input Connections | Screw terminal |
| Output Connections | Screw terminal |
| Color | Grey |
| Dimensions | 45 x 100 x 100 mm |
| Weight | 300 g |
| Brand | Adel |
| Package | 1 |
| Availability | 4 - 6 weeks |
Write Your Own Review
Related Products
