480 W AC/DC DIN Rail DC UPS; 44,0 - 56,7 VDC 10,0 A CBI4810A

This is a revolutionary line, designed to provide uninterruptible power whatever condition the system is in, by means of sophisticated and completely automatic management of any type of industrial battery. Easy to install, these are compact devices which perform three key functions: power supply, Back Up Module and Battery Charger. The UPS range is no more than an extension of the CBI range, designed to enhance some of its particular features, such as the RS 232 connection output, dual output voltage independent.

Thanks to the All In One units (DC-UPS), it will be possible to optimize power management. The available power is automatically allocated between load and battery, supplying power to the load is the first priority of the unit thus it is not necessary to double the power, because also the power going to the battery will go to the load if the load so requires.

The maximum available current on the load output is 2 times the value of the device rated current In. We call “Battery Care” the concept base on algorithms that implement rapid and automatic charging, battery charge optimization during time, flat batteries recovery and real time diagnostic during installation and operation. The Real Time Auto-diagnostic system, monitoring battery faults such as, battery Sulfated, elements in short circuit, accidental reverse polarity connection, isconnection of the battery, they can easily be detected and removed by help of Blink Code of Diagnosis Led; during the installation and after sell. The continuous monitoring of battery efficiency, reduces battery damage risk and allows a safe operation in permanent connection.

Each device is suited for all battery types, by means of jumpers it is possible setting predefined curves for Open Lead Acid, Sealed Lead Acid, Gel, Ni-Cd (option). They are programmed for two charging levels, boost and charge, but they can be changed to single charging level by the user. A rugged casing with bracket for DIN rail mounting provide IP20 protection degree. They are extremely compact and cost-effective.

Power supplies can be paralleled for 1+1 redundancy to obtain higher system availability.
At that case please use the Redundancy Module MR220 which includes decoupling diodes.

Optionally the power supplies can be paralleled for 1+1=2 parallel to obtain a double power of a single unit.
At that case please use RTCONN communication lead to connect each device together.

Available options:
CBI-Holders Battery modules for sealed lead acid batteries
MR220 Redundancy Module RTCONN Lead for parallel use with Two Wires (2 m). Suitable with 2 CBI2420AP units.